HXE-400/13DL Copper rod breakdown machine with annealer
HXE-400/13DL Copper rod breakdown machine with annealer is used to
draw and anneal single bare copper wire from 8mm to 1.2mm-3.5mm.The
drawing capstans are arranged in a line that are able to work
continuously with drawing speed and electrical control can be
matched with each other.
II. Compositions of equipment
|1. Pay-off shelf||1|
|2. HXE-400/13DL Main drawing machine||1|
|3. HXE-TH450 Annealing machine||1|
|4. HXE-180 Tension controller||1|
|5. HXE-SX500/630 Double spoolers||1|
|6. HXE-WF750 Coiler & Basket changer system||1|
|7. Electrical cabinet||1|
|8. Gear Oil Cooler and Pump||2|
|9. Operation panel / With PLC&Touching screen||1|
|10. Spare parts|
III. Main technical parameters
|3. Diameter of capstans||400mm|
|4. Speed||1000m/min, Capacity say 1.2mm, 600kg per hour|
|5. Slip ratio||1.238|
|6. Quantity of capstan||13|
|7. Capstan||Tungsten carbide|
|8. Quick dies change||Available|
|9. Main motor||DC 200KW|
|10. Fix speed motor||DC 55KW|
|11. Gear||Not Changeable|
|12. Noises of machine||≤85 db|
|13. Protection cover||Installed|
|14. Lubrication system||1 set|
IV. Machine structure
Annealing method is DC Three section annealing, there are three
contact capstans, as Pre-Heating, Annealing and Drying. For drawing
machine part, there is belts that connection from the Fix-speed
capstan to the Annealer machine to achieve the transmission, as
keep same speed.
Connect the Up capstan and Down capstan with Positive and Negative
power, to make the wire in a short circuit, to achieve the heating.
There is annealing plate to auto track and adjust the speed and
To achieve fast coolant to make the wire soft(Annealing), the Down
capstan is immersed into the coolant water(There is a water tank in
the bottom of the Annealer machine), coolant water is 0.5%
emulsion. With the Pump to pump the coolant water through all pipes
and valves, half sealed annealing door. Adjust the valves to adjust
the coolant water in certain height.
To make sure the wire no oxidation, in the annealing protection
pipe has steam (Buyer self will prepare Steam generator).
In the drying section, has a blowing device (Require two Tungsten
dies, Buyer self prepare, Die size D*1.04), by compressed air
(Buyer self prepare Air compressor) to blow the water on the
surface of the wire.
V. Advantage and after-self service
(1). HENGXIE has some world famous parts suppliers, has special
lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our
own factory , quality is reliable.
(3). DC. three-section annealing
(4). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our
company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.