Waterproof PP Fume Hood With Porcelain White PP Countertops and
Fume hoods are large equipment in laboratories, especially chemical
laboratories. The purpose is to reduce the exposure of the
experimenter and harmful gases. Complete isolation requires the use
of a glove box. The fume hood is the primary barrier to protect
personnel from toxic chemical fumes. It can be used as an important
safety backup device, such as the failure of chemical experiments,
the discharge of harmful gases when chemical fumes, dust and toxic
gases are generated, and the protection of workers and the
1.General purpose: Suitable for general chemical laboratories.
2.Non-pipe type: Built-in high-efficiency activated carbon filter
that can be discharged directly into the room.
3.Wind supplement type: Replenish air from the outside to reduce
the load on the laboratory air conditioner.
4.Conjoined type: Expand the experimental space to provide
convenience for large instruments.
5.Desktop: Fume hood mounted on the bench
6.Two-sided type: They can be operated from both sides
7.Floor type: They is suitable for large experimental devices
|Name||PP Fume Hood|
|Main Material||8mm Porcelain White Polypropylene Board|
|Countertop||12mm Polypropylene Top, 12.7mm Phenolic Resin Top, 19mm Expoxy
Resin Top, 20mm Ceramic Top|
|Sash||5mm Thickness Tempered Glass|
|Accessories||PP Sink, Water Tap, Single Eye Wash, PP Peg Board|
Compared of Laboratory Countertop:
|Material||Phenolic Resin||Epoxy Resin||Ceramic|
|Component||Kraft Paper||Quartz Sand||Kaolin|
|Colour||Normal Fifteen Colour||Black and Gray||Black,Lvory White and Apple Green|
|High Temperature Resistance||135°C||400°C||1200°C|
|Feature||149 Chemical Reagents Resistance||Verious Chemical Reagents Resistance||Majority Chemical Reagents Resistance and Organic Solvents|
|Avoid Reagents||Have a Flaw In 98% Sulfuric Acid||Have a Flaw In 98% Sulfuric Acid||Have a Flaw In 48% Hydrofluoric Acid|
|Test Reagents||16 Hours||16 Hours||16 Hours|
1.For non-volatile drugs, drop the drug directly onto the
2.For volatile drugs, use a cotton wool to saturate the drug and
contact it with a countertop. Cover with a visible glass or a
3.The above drugs were placed on the table at room temperature of
25 degrees. After 16 hours, the table was washed with soap and
water, and dried for inspection.
1.Professional advice to help you purchase laboratory products you
2.Professional export service team severs in the deal.
3.Customized service is available,OEM business is appreciated.
4.We will inspect and test all laboratory products carefully to
ensure no damage and lost beforedelivery.
5.The success of our cooperation can be guaranteed for our company
is a credible and honest partner.
6.We have our own overseas technician and installation team.