Mobile 100T Double Gantry Type Hydraulic Press Machine

100ton Double Mobile Gantry Hydraulic Press Machine PLC Controlled

Application scope:
This Double Gantry type hydraulic press machine is mainly used for the leveling and calibration after welding of bogie frame side beam and cross beam of type A & B metro, city car and special vehicles. The machine is also applicable for other industrial applications.

Technical Parameters:

(Above parameters are indicative and can be modified according to the customer's requirements.)

Machine Features:

• Double Gantry type structure with mobile gantry design.
• The gantry hydraulic press machine is mainly composed of fixed working table, Double mobile gantry frame, rams, hydraulic system and electrical control system, etc.
• The frame is of full steel overall welded structrure, and carried out stress relief annealling treatment. With sufficient strength and rigidity.
• Machine main structure and working principle: the machine is equipped with two gantry which can move back and forth along the adjustment and repair platform. The gantry can work at any position within the scope of the working table. The gantry movement is driven by the mechanical transmission device, and the lateral guide wheel is used as the guide when moving. The distance between the lateral guide wheels of the machine is reasonable, which can prevent the gantry from walking and biting and move freely.
• The upper part of the gantry is equipped with a ram running trolley device, which can make lateral reciprocating motion along the gantry under the drive of the mechanical transmission device. Therefore, the ram can flexibly realize the three-dimensional movement of longitudinal, transverse and vertical when straightening. It can be easily straightened at any point within the allowable range of worktable.
• The ram can move freely with the trolley within the effective range of the worktable, and the ram is made into replaceable structure to facilitate the replacement of this part after long-term wear and tear; heat treatment such as quenching of guide rail, roller surface and working surface of ram sleeve has great hardness and wear resistance.
• It's provided with T-slots on the surface of Ram and working table.
• The main cylinder and piston rod are good quality 45 forging steel.
• The hydraulic system is installed on the gantry beam.
• It's provided with independent control panel, display and hand operation box on the gantry for easy operation.
• Siemens PLC and display to control and monitor the whole operation.
• The machine is a new equipment (including all parts, components and accessories), and manufactured with new high-quality materials. The mechanical components used is a series of advanced, high quality, reliable and practical products, and conforms with relevant international standards.
• Metal components of equipment and instruments are rustproof and painted except machining surface and electroplating surface.
• All devices and meters are measured in accordance with the international system of units (SI) standards. The design, manufacture and tests of the equipment and meters conform to international industrial standards (ISO) and International Electrotechnical standards (IEC). The protection grade of all electrical components is not less than IP54.

Warranty & After-sale Service:
One year of free warranty and lifetime maintenance for the equipment for your purchased equipment. During the warranty period, only due to design defects, manufacturing quality, and quality of purchased parts, our company is responsible for free maintenance. The company provides the required replacement parts (except for consumable parts). Over the warranty period, repairs only are charged at the cost price. At the same time, you will enjoy a lifetime software upgrade from the date of purchase; our engineers will provide a quick response when service is required.

Questions and Inquiry:

If you have any questions and interest about our machines, please feel free to contact with us!

Hubei Heqiang Machinery Development Limited by Share Ltd was established in December of 2000. The company is located in Ezhou of Hubei province, next to Wuhan city, with an area of 40,000 square meters and 120 employees. Since its establishment, Hubei Heqiang is mainly engaged in R&D, design, manufacture, sales, maintenance and service of railway workshop equipment and forging equipment. After more than 20 years' rapid development, Hubei Heqiang has already grown into one of the leading manufacturers of raiway workshop equipment and forging equipment in the market.

Hubei Heqiang is a High-Tech enterprise and owns more than 130 patents, including 11 invention patents and 14 software copyrights. The company always adheres to the quality policy of "Innovative design, Strict control, Elaborate assembly and Customer satisfaction", and currently has more than 150 sets of equipment for metal machining, welding and test. It has formed an unique system of equipment configuration and quality control and got the certificates of ISO9001:2015, ISO14001:2015 and ISO45001:2018. During business operation process, Hubei Heqiang always adheres to the implementation of the industry's highest management standards, continuous improvement of the work, continuous improvement of products and service, to reach the maximum pursuit of customer satisfaction.

The company is committed to build Hubei Heqiang into the most advanced manufacturer of railway workshop equipment and to provide better products and service for all the related industries.

The products have been exported to Mauritania, Guinea, Kenya, Algeria, Serbia, Poland, Russia, Azerbaijan, Uzbekistan, Mongolia, Saudi Arabia, Iran, Myanma, Vietnam, Malaysia, Singapore, Indonesia, Peru, Chile, Suriname, Colombia, Mexico, Canada, etc.