BSD-88230 Screw Air Compressor Oil Additive Package

Product Performance

This product is compounded from a variety of high-quality single agents such as extreme pressure agents, antioxidants, detergent- dispersants, antiwear agents, antifoaming agents and rust inhibitors, etc. It can be added to Group II, Group III, PAO and ester synthetic base oils.

Product Feature

• Outstanding oxidation stability to prevent the formation of carbon deposits and paint films on the air valves and other components.
• Excellent corrosion resistance, which can effectively protect the metal surface of the compressor and extend its service life.
• Good air release performance to avoid cavitation and maintain the maximum compression ratio.
• Good antiwear performance to effectively prevent the wear and tear between the sliding vanes and rings in the air compressor.
• Excellent antifoaming performance, not easy to form an excessive foam layer.

Scope of Application

• It is suitable for the lubricating oils of rotary air compressors such as oil-immersed, oil-injected or oil-sprayed sliding vane-type, Roots-type and screw-type compressors, and is also applicable to piston compressor oils.
• Can be used to formulate L-DAG, L-DAH and L-DAJ screw rotary compressor oils.
• Can be used to formulate L-DAA, L-DAB and L-DAC piston reciprocating compressor oils.

Recommended Dosage and Base Oil

• Dosage of screw air compressor oil: L-DAG: 0.6%; L-DAH:1.1%; L-DAJ:1.5%; L-DAA:0.25%; L-DAB:0.35%; L-DAC:0.4%
• Ordinary screw air compressor oil: For Chinese standard mineral oil, it is recommended to use base oils such as 150N, 250N or imported base oils of the same grade.
• Semi-synthetic screw air compressor oil: 40% synthetic PAO or diester base oil + 60% Chinese standard mineral oil.
• Fully synthetic screw air compressor oil: PAO and esters are synthesized into base oils.
• The base oil requires a high viscosity index and a high flash point. Using deeply refined hydrotreated mineral oils or synthetic oils as base oils can effectively extend the service life of the oil products.

Technical Parameter

Product Appearance

Packaging and acceptance

• This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according to customer needs.
• Product identification, sample retention, and delivery acceptance shall be carried out in accordance with SH/T0164 standard.

Product storage, transportation, and compounding agent blending operations and precautions

• The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other petroleum products.
• When adjusting oil, the maximum temperature should not exceed 75 ℃.
• Long term storage temperature should not exceed 50 ℃.
• Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using, pay attention to sealed storage.

Health and Safety

• The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general petroleum products in terms of safety, environmental protection, and use.
• Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away from children.
• Wear protective gloves when using, and the operator does not need to take special safety precautions. Once it splashes into the eyes or skin, rinse thoroughly with plenty of water.
• Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
• Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling and disposal, and are prohibited from being discharged into water bodies or soil.
• For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).