astm standard for charpy impact test

Brand Name:Infinity Machine

Model Number:RS-8215B

Place of Origin:Made in China

... which endure the impact at specified angle and load. Test standards: CHARPY: ASTM D6110, ISO 179, GB/T1043 Features: After test, test results show automatically and they can be saved or printed out. After test, it shows the angle and energy automatically.

Brand Name:PTE

Model Number:pendulum impact tester charpy impact testing machine

Place of Origin:China

... according to national standard GB/T3038-2002 “ Inspection for pendulum Impact Testing Machine” and GB/T229-1994 “Charpy notch Impact Test Method for metal material”. It is also accordance with international standard ISO148-1983,ASTM E23 and

Brand Name:JINHAIHU

Model Number:XJJC-5J

Place of Origin:BEIJING, CHINA

...Charpy Impact Tester/Charpy Impact Testing Machine XJJC-5J Electronic Pendulum Charpy Impact Tester/Charpy Impact Testing Machine is used for test engineering plastics, glass-steel, ceramics, casting stone, plastic wiring, insulating material, plastic pipe material and other non –metallic materials for anti- impact intensity. The products satisfy the standard demands of ISO 179, ISO 180,GB/T 1043, GB/T 1843,ASTM...

Brand Name:LIYI

Model Number:LYXJJD50

Place of Origin:CHINA

...plastic wiring, insulating material, plastic pipe material and other non –metallic materials for anti- impact intensity. 2. The products satisfy the standard demands of ISO 179, ISO 180,GB/T 1043, GB/T 1843,ASTM D256,DIN53453,GB18743,ISO9854,DIN12608 and

Brand Name:Great Win

Model Number:GW-049E

Place of Origin:China

...Charpy Impact Test Equipment Foam Hardness Compression Ifd Test Equipment Testing Machine Prices (GW-049E ) Brief introduction: This machine is used to test the concave hardness of porous elastic materials. Standard: GB/T 18941 ISO 3385 ASTM D3574 Technical Specifications: Max load : 200kg Unit:kg,N,LB Test...

Brand Name:BOTO

Model Number:BT1506

Place of Origin:CHINA

...ASTM E23 Pendulum Charpy Impact Testing Machine Charpy Impact Testing Machine Technical indicators: 1. Impact energy: 300J (sledgehammer) 150 (small hammer) 2. Impact speed: 5.2m / s 3. Pre-lifting angle of pendulum: 150 ° 4. Span of sample support: 40mm 5. Round corners of support jaw: R1.0 ~ 1.5mm 6. Fillet of impact blade: R2.0 ~ 2.5mm R8mm 7. The distance from the center of the pendulum to the impact point: 750mm 8. Standard

Brand Name:iqualitrol

Model Number:CDW-60

-60°C~+30°C Low Temperature Chamber for Metal Specimen Impact Test Application: CDW Series Temperature Chamber is designed according to the standard of 'Charpy Notch Impact Test Method for Metal Materials. It adopts compressor cooling technology, which is ...

Brand Name:SAMYON

Model Number:LY71-UV

Place of Origin:CN

... for notches bar impact testing of metallic materials BS EN 10045-1 Charpy impact test on metallic materials ISO 148-1 Metallic materials –Charpy pendulum impact test – Part 1: Test method ISO 83 Steel - Charpy impact test (U-notch), GB 2106-80 GB/T

Brand Name:GAOXIN

Model Number:GX-JB

Place of Origin:China

... under dynamic load, in order to determine the material properties under dynamic load by the absorbed energy in the test. Test standards: ISO148, EN10045, ASTM E23, GB/T3808-2002, GB /T229-2007 Features: (1) The principle machine of the testing machine has

Brand Name:TOBO

Model Number:C70600

Place of Origin:CHINA

Welders and piping experts prefer low carbon steel for things like boiler plates, wire products and seamless tubing and piping uses. low temperature steel pipe A/SA-333 Grades allow for cold temperature service to minus 150°F. Material is always provided...

Brand Name:Best

Model Number:114.3 - 508 mm

Place of Origin:China

...ASTM A105 & ASTM A350-LF2 DUAL CERTIFIED - a Special Quality Fine Grain Carbon-Manganese Steel for Piping Components Characteristics − A105 and A350-LF2 are standard specifications for forged carbon steel piping components. A105 for ambient and higher-temperature service; A350-LF2 for low-temperature service with Charpy V-Notch impact energy testing...

Place of Origin:China

Brand Name:HMT

... Testing Standard Density 1.2 g/m³ ASTM D-792 Tensile Strength At Break 70 MPa ASTM D-638 Flexural Strength 96 MPa ASTM D-790 Flexural Modulus 2343 MPa ASTM D-790 Charpy Impact notched 45KJ/m2 ASTM D-638 Mould shrinkage Rate 0.0050-0.0070mm/mm ASTM D