socket interlock withdraw force test apparatus

Brand Name:Sinuo

Model Number:SN1013

Place of Origin:China

... fig13, fig14. IEC 62196-1:2014 clause 17.2. Equipment Overview for Switch Socket Interlock Withdraw Force Test Apparatus Test purpose: The structure of the charging interface should allow the charging gun to be easily inserted and pulled out, and should

Brand Name:Sinuo

Model Number:SNQC1013

Place of Origin:China

...Interlock Withdrawal Force Test Apparatus IEC 62196-1 Product InformationN For Vehicle Switch-Outlet Interlock Withdrawal Force Test Apparatus: This test equipment conforms to IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14. It is used to check the maximum force required when the test plug is withdrawn from the socket...

Brand Name:kingpo

Model Number:KP-BCL04

Place of Origin:china

...Withdrawal Force Test Apparatus Application: This device complies with the requirements of IEC60884 Figure 18/19, VDE0620, etc. It is suitable for checking the maximum force required to pull the plug out of the socket and the single pole pin pulled out from the socket assembly. Whether the minimum force...

Brand Name:PEGO GROUP

Model Number:PG-AS/NZS3112

Place of Origin:China

... of clause 3.14.8.3 and clause 3.14.8.2, includes three-pins maximum withdrawal Force Test Plug (10A/250V) to check the maximum force required when the plug is pulled out of the socket, and single-pin minimum withdrawal force test pin to check the

Brand Name:SHC

Model Number:SC-BC02

Place of Origin:China

... pulled out from the socket assembly. Whether the minimum force required is within the range specified by the standard. Parameter: 1. Standard one-pole 10A, three-pole 10A and 16A test standard plugs each, 10A 16A test standard plugs each, adjustable: 1)

Brand Name:HongCe

Model Number:HC9916

Place of Origin:China

... shall allow the easy insertion and withdrawal of the plug, and prevent the plug from working out of the socket-outlet in normal use. For the purposes of this test, resilient earthing contacts are deemed as a single pole, regardless of their quantity,

Brand Name:HeJin

Model Number:HC9916

Place of Origin:China

...General requirements’ clause 16 and figure 3; IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes – Part 1: General requirements’ clause 22, table 16 and figure 18. Application of Apparatus For Checking The Withdrawal Force:

Brand Name:JLX

Model Number:LX-6202

Place of Origin:Made in China

...Test Smallest Opening Width and Smallest Withdrawal Force of Contact Sockets Lehre 2 – Lehre zur Prüfung der kleinsten Öffnungsweite und der kleinsten Abzugskraft der Kontaktbuchsen Germany plug and socket gauge is strictly designed and manufactured according to the relevant standard requirements of VDE0620-1:2010. This plug and socket test gauge is mainly used to test...

Place of Origin:China

Brand Name:KeRang

Apparatus for verification of maximum and minimum force MF-1 Technical parameters: 1, It is equipped with 10A ambipolar plug ,the three pole plug of 10A and 16A and the testing standard plug pin of 10A,16A. 2, It is also equipped with a set of weight and ...

Brand Name:KRIPAL

Model Number:UKS-C154-6

Place of Origin:China

...testing : Our products have undergone the tests under the extreme conditions such as the pesky cold and hot , dustproof, immersed in water abd so on , and they have got the certifications from relevant authorized organizations according to the international standards . 1.Humiture enactmeny 2.Pug -in/withdrawal force test 3.Dstproof test 4.Glow wire test 5.Waterproof test High quality IP44 female and male industry plug and socket...

Place of Origin:DONGGUAN

Brand Name:J&L

Model Number:8PIN DIN SOCKET

... DIN SOCKET Specifications : Contact Resistance : 20m OHM Insulation Resistance : DC 500V 100M OHM MIN Voltage Withstanding : AC 500V 1 MINUTE INSERTION FORCE : 6.5KG MAX WITHDRAW AL FORCE : 1-5KG LIFT TEST : 5000 CYCLES MIN .AFTER TESTING ,CONTACT ...

Brand Name:ANYO

Model Number:CK6.35-17

Place of Origin:CHINA

...socket for amplifier-in Material: Terminal Brass Outer contact Brass Housing PBT Back cover PBT Mechanical performance: Project Test methods and conditions Specification and requirements Insertion force With a load cell or similar device, plug socket power measurement, the standard should be slowly inserted into the plug socket, plug to test 5 times. 5~30N Withdrawal force...